Hall Research HDMI on HDBaseT 1×3 Splitter

Extend HDMI video to 3 remote displays using HDBaseT™
Use a single UTP cable to extend video to 100 meters (330 ft)
Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
Supports virtually all HDMI and DVI resolutions
Local HDMI output for direct connection to a local display
EDID management with USB port for EDID manipulation using a PC

Beskrivelse

The UHBX-3S is an HDMI splitter with one local HDMI output and 3 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with “Pass-thru”, “Learn”, and “Emulate” features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-3S provides convenient front panel LED status indicators for all HDBaseT™ parameters to quickly verify proper operation.

The UHBX-3S supports PoH (Power over HDBaseT™) using an optional (sold separately) external 48 v DC power supply (part number 511-PS4812). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT™ compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.

Compatible receivers include the economical UH-1BT-R & UH-1BTX-R for HDMI only OR UHBX-R-PD that supports RS-232, PoH, and Long Reach modes.

For best results we recommend using Alliance approved cables listed at this site.
For more information about our other HDBaseT™ products please follow the link below to the Product Selection Chart.

Compatibility Table For Single UTP HDMI/DVI Extenders
Sender Receiver Description
Model UH-1BT-R UH-1BTX-R UHBX-R-PD UHBX-R-PSE
UH-1BT-S link to UH-1BT Not a fully compatible pair HDMI to 70m
UH-1BTX-S Not a fully compatible pair link to UH-1BTX HDMI to 100m (150m with Rev C Receiver)
UHBX-S-WP link to UHBX-WP-P2 HDMI + Power to 100/150m
UHBX-SC-WP link to UHBX-WPC-P2 HDMI + RS232 + IR + Power to 100/150m
UHBX-S-PD link to UHBX-P2 HDMI + RS232 + IR + Power to 100/150m
UHBX-S-PSE link to UHBX-P1 HDMI + RS232 + IR + Power to 100/150m
UHBX-3S Not a fully compatible pair Not a fully compatible pair Compatible pair but not all features are supported HDMI + RS232 + Power to 100/150m
UHBX-6S Not a fully compatible pair Not a fully compatible pair Compatible pair but not all features are supported HDMI + RS232 + Power to 100/150m
UHBX-8X Not a fully compatible pair Not a fully compatible pair Compatible pair but not all features are supported HDMI + RS232 + IR + Power to 100/150m
UHBX-SW3-WP link to UHBX-SW3 HDMI + MHL + VGA + RS232 + IR + Power to 100/150m

Egenskaper

  • Extend HDMI video to 3 remote displays using HDBaseT™
  • Use a single UTP cable to extend video to 100 meters (330 ft)
  • Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
  • Supports virtually all HDMI and DVI resolutions
  • Local HDMI output for direct connection to a local display
  • EDID management with USB port for EDID manipulation using a PC
  • RS-232 port for sending commands to remote displays
  • Power-over-HDBaseT™ meets IEEE 802.3af standard

Spesifikasjon

  • Input Port:
    1x HDMI Female (Type A)
  • Output Port:
    1x HDMI Female (Type A), 3 RJ45 connectors
  • Standards:
    DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth and 3D video)
  • Signal Type:
    HDBaseT
  • Connectors:
    Locking HDMI
  • Video Resolutions:
    DVI signal VGA (640×480) thru WUXGA (1920×1200)
    HDTV signal 480i through 1080p
    Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
  • Audio Formats:
    All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
  • DDC:
    Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
  • CEC:
    Pass-Thru CEC for Consumer Electronics Control compatible devices
  • RS232:
    Bidirectional (full-duplex) any baud rate up to 115,200
  • PoH:
    Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts max
  • Power Supply:
    100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
    Actual DC current 1.6A max
    (Optional ) 100 VAC to 240 VAC, 50-60 Hz, external; 48VDC, for PoH
  • Power:
    Sender: 10.15 watts maximum
  • Temp/humidity:
    Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
    Convection
  • Cooling:
    Convection
  • Mounting:
    Threaded nuts on bottom for rack-shelf mounting or optional rack ears
  • Enclosure Type:
    Metal (Aluminum ends, Aluminum Extrusion)
  • Dimensions:
    1.66″ H x 8.42″ W x 5.59″ D (42mm H x 214mm W x 141mm D)
  • Product Weight:
    Product – 2.5 lbs (0.386kg)
    Shipping – 3 lbs (0.681 kg)
  • Vibration:
    ISTA 1A in carton (International Safe Transit Association)
  • Safety:
    CE
  • EMI/EMC:
    CE, FCC Class A
  • MTBF:
    90,000 hours (Calculated Estimate)
  • Warranty:
    2 years parts and labor

    Manualer / Nedlastninger

    Brochures

    Windows® PC Software

    UHBX-3S GUI V1.2

    Additional Downloads